Installation
When to Install Blinds During a Renovation (and What to Plan Early)

Blinds go up last. But they need to be planned first.
During a home renovation, blinds are usually one of the last things installed. But many decisions that affect blinds must be made much earlier — during electrical work and false ceiling construction. Get the timing right and the result looks built-in; get it wrong and you end up chasing walls or cutting into a finished ceiling.
Stage 1: Planning and design
Decide early which windows will have blinds, which type, and whether any will be motorised. Key questions:
- Which rooms need blackout, which need light-filtering?
- Will any blinds be motorised? Battery or wired?
- Will blinds be recessed into the false ceiling?
- Will you keep curtains too?
Our step-by-step choosing guide helps.
Stage 2: Electrical work
If you want wired motorised blinds, ask the electrician to run a power point near the top of each relevant window now. Even if you are not motorising immediately, adding points during renovation costs far less than later. Consider connecting them to inverter-backed circuits. Read battery vs wired motors.
Stage 3: False ceiling
This is the most important blind-related stage:
- Blind pockets: a recessed channel in the false ceiling where the blind sits hidden — gives a seamless hotel look.
- Battens: wooden strips fixed behind POP or gypsum where blind brackets will go, so they have something solid to screw into.
- Curtain tracks: plan their position relative to blinds so they do not clash.
Share blind dimensions with your ceiling contractor before the ceiling is closed.
Stage 4: Window replacement
If you are changing windows, measure for blinds only after new frames are installed. Handle positions and frame depths change everything.
Stage 5: Plastering and painting
Blinds should go up after painting is complete. Paint dust and fumes damage fabric, and installers drilling into fresh paint can mark walls. Touch-ups after installation are minimal if painting is finished first.
Stage 6: Measuring
Measure once walls, windows and ceilings are finished, but before final cleaning. Book measurement as soon as painting starts to finish, so fabrication (7–21 days) runs in parallel with final works. A free site measurement across Delhi NCR is available.
Stage 7: Installation
Install after painting and before moving furniture in, ideally after the deep clean. Installers need clear access to windows. Read what happens at installation.
A simple renovation timeline
- Decide blind types and motorisation — design stage.
- Run power points — electrical stage.
- Build pockets and battens — false ceiling stage.
- Book measurement — as painting finishes.
- Fabrication — 7–21 days, while final works continue.
- Installation — after painting and cleaning.
Common renovation mistakes
- No battens behind false ceilings — brackets cannot hold.
- No power points for motors — chasing walls later.
- Measuring before new windows are installed.
- Installing blinds before painting.
- Curtain tracks and blinds planned separately and clashing.
Cost planning
Include blinds in your renovation budget from the start. Made-to-measure rollers cost ₹100–₹250 per sq ft and zebras ₹120–₹190, GST included; motorisation adds ₹3,000–₹6,500 per window. See the 2BHK and 3BHK budget guide.
Coordinating trades
Give your electrician, false ceiling contractor and blind supplier the same window list early. A short meeting or shared plan with bracket positions, motor ends and power points saves rework. Ask the blind supplier to visit before the false ceiling is closed if you are building pockets.
Planned early, blinds become part of the renovation design rather than an afterthought.
FAQs
Can blinds be installed before flooring?
It is better after flooring and painting so they are not exposed to dust and damage.
Do recessed blind pockets cost more?
They add some ceiling work, but the finished look is much cleaner.
Not sure of your sizes?
Read our measuring guide or try the AR self-measure tool to get exact numbers.
