Explainers
Side Channels for Blinds: How to Seal the Light Gaps at the Edges

Blackout fabric blocks the middle of the window. Side channels block the edges.
People who buy blackout blinds are often surprised to find thin strips of light at the sides. The fabric itself blocks light, but a roller blind needs a small gap between the fabric and the window frame to roll freely. Side channels — also called light guides or tracks — solve this by running the fabric edges inside vertical profiles.
How side channels work
Two narrow aluminium or plastic profiles are fixed vertically on either side of the window. The edges of the blind fabric run inside these channels as the blind moves. Light that would pass around the fabric edge is blocked by the channel. Combined with a cassette at the top and a bottom bar that seals at the sill, the window can become almost completely dark.
Where side channels are worth it
- Bedrooms for shift workers and day sleepers. Read blackout for day sleepers.
- Nurseries for daytime naps.
- Home theatres and media rooms.
- East-facing bedrooms with early sunrise.
- Windows that are often open — channels stop fabric flapping in the wind.
Advantages
- Near-total darkness when paired with blackout fabric.
- Fabric stays steady in breeze and under fans.
- Neat, finished appearance.
- Some insulation benefit from a better seal.
Disadvantages
- Cost: channels and the precise fitting add to the price.
- Precision: windows must be measured very accurately and walls reasonably straight.
- Dust: channels collect dust and need occasional cleaning.
- Handles: window handles may conflict with channels on some windows.
Alternatives to reduce light gaps
Generous outside mount
Mounting the blind outside the recess, overlapping 7–10 cm on each side and above, reduces visible side gaps significantly without channels. Read fixing light gaps.
Cassette at the top
A cassette covers the roll and reduces top leakage. See cassette vs open roller.
Curtains over the blind
Blackout curtains that extend beyond the window on a ceiling track block side light effectively.
Back roll inside a deep recess
In deep recesses, a back-roll blind sits closer to the glass, which can reduce visible gaps.
Inside mount and side channels
Side channels are usually fitted inside the window recess, fixed to the reveal on each side. That requires enough recess depth and reasonably straight walls. Older homes with uneven plaster may need adjustment.
Which blinds can use channels?
Side channels are most common with roller blinds, especially blackout fabrics. Zebra blinds are not designed for full darkness, so channels are rarely used with them.
Measuring for side channels
Precision matters. Measure width at top, middle and bottom, height at both sides and centre, and recess depth. Check walls for straightness. This is a case where a free site measurement across Delhi NCR is strongly recommended.
Cost
Blackout rollers at BlindsBazaar fall within the ₹100–₹250 per sq ft range, GST included, with side channels as an additional option. Every order includes a 3-year warranty.
Is it worth it?
- You need total darkness during the day: yes.
- You just want a darker bedroom at night: generous overlap may be enough.
- Window often open in wind: channels help keep fabric steady.
Cleaning side channels
Vacuum the channels with a crevice tool every few weeks and wipe with a dry cloth. Dust build-up in the channels can make the fabric edges drag. Never spray cleaning liquids into channels — moisture can attract more dust and affect smooth movement.
For most bedrooms, good overlap is enough; channels are for rooms where every sliver of light matters.
FAQs
Do side channels make a room 100% dark?
Very close, combined with a cassette and bottom seal. Tiny leaks may remain.
Can channels be added later?
Sometimes, but it is easier to plan them with the blind order.
Not sure of your sizes?
Read our measuring guide or try the AR self-measure tool to get exact numbers.
