Explainers

Blinds for Bay Windows: Covering Angles Without Gaps

Team BlindsBazaar12 November 20265 min read
d328e9b7-4b91-4e07-a176-addd8c714077
A bay window is three windows pretending to be one. Treat each face on its own.

Bay windows — windows that project outward from the wall, usually with a central panel and two angled side panels — create a lovely nook for seating or a reading corner. They appear in bungalows, villas and some premium flats. Fitting blinds to them needs a little planning because of the angles.

Types of bay windows

  • Three-sided (angled) bay: a central window with two side windows at 30–45 degrees.
  • Box bay: side windows at 90 degrees to the front — easier to fit.
  • Bow window: a gentle curve made of several narrow panels.

The standard approach: one blind per face

The most effective way to cover a bay is to fit a separate blind on each window face. Each blind sits square to its own window, operates independently and covers its glass properly. For a three-sided bay, that means three blinds; for a bow window, one per panel or per pair of panels.

Handling the corners

Where two angled faces meet, blinds cannot overlap like they do on a flat wall. Options:

  • Inside mount, butted close: each blind fits inside its own recess; small gaps at corners remain but look tidy.
  • Corner-cut headrails: some systems trim the headrail ends so blinds meet more closely at the corner.
  • Overlapping at slightly different depths: one blind sits a little further forward so its edge covers the corner of the next.

Perfect darkness at bay corners is difficult; plan bedrooms accordingly.

Inside or outside mount?

Inside mount looks neat and keeps the nook usable — blinds sit within each window recess, leaving the seat or ledge free. Outside mount on the wall above each face can reduce gaps but may interfere with adjacent blinds at angles. Read inside vs outside mount.

Best blind types for bays

  • Roller blinds: slim, clean, fit well inside each face. Blackout available.
  • Zebra blinds: adjustable light for a reading nook or living room bay; cassettes look neat.
  • Roman blinds: soft and decorative, but the stacks can look heavy in a small bay.

Alternatively: one curtain across the whole bay

A curved or angled curtain track across the bay opening is another approach, closing off the whole nook. Many people combine blinds on each face for daily light control with curtains for evening softness.

Measuring bay windows

  1. Measure each face separately: width at top, middle and bottom for inside mount.
  2. Note the angle between faces.
  3. Check that headrails will not collide at corners.
  4. Measure depth for brackets and handles.

Bays are one of the windows where a free site measurement across Delhi NCR is especially helpful. Our measuring guide covers basics.

Light and heat

Bays catch sun from several directions. Choose fabric per face: a sunscreen or blackout for the face that gets afternoon sun, light-filtering for the others. Keep one colour so the bay reads as one.

Operation

Bay windows can be hard to reach over a window seat. Motorised blinds, grouped on one remote, raise all faces together. Motorisation adds roughly ₹3,000–₹6,500 per window.

Cost example

A three-sided bay with a 5×5 ft centre (25 sq ft) and two 2×5 ft sides (10 sq ft each) totals 45 sq ft. In standard roller fabric, that is roughly ₹4,500–₹5,900; in zebra, ₹5,400–₹8,600. Prices include GST, with a 3-year warranty.

A well-planned bay becomes the favourite seat in the house.

Window seats and cushions

If the bay has a seat, inside-mounted blinds keep the cushions clear of fabric. Choose a blind colour that complements the cushions so the nook feels designed as one piece.

FAQs

Can one blind cover a whole bay?

Not for angled bays — the blind would not sit against the glass. One blind per face is standard.

Will there be light gaps at the corners?

Small gaps are normal. Good planning keeps them minimal.

Not sure of your sizes?

Read our measuring guide or try the AR self-measure tool to get exact numbers.